Bosch Vacuum Cleaner Suction [Problems, Solutions & Guide]

Did your Bosch vacuum lose its suction? Well you’re in right place. Here we’ll help you identify the problem your Bosch vacuum has . . .

Bosch Vacuum Cleaner No Suction – Why and How To Fix

If your Bosch vacuum cleaner loses its suction power, the machine could have one of many problems. Keep on reading to figure out the problem your Bosch vacuum cleaner might have . .

The vacuum bag is too full

If the bag of your Bosch vacuum cleaner is too full, the machine won’t be able to pick up dirt properly. To solve the problem, simply empty the vacuum bag.

The vacuum bag is torn

If the bag of your Bosch vacuum cleaner is torn, the vacuum won’t be able to pick up dirt properly. To solve the problem, you will need to replace the vacuum bag. Follow the steps below to replace a Bosch vacuum cleaner bag. . .

Step 1. Turn your vacuum cleaner off and unplug it from the power outlet.

Step 2. Unclip and remove the cover of the vacuum canister.

Step 3. Slide the filter to seal the bag.

Step 4. Remove the vacuum bag and dispose of it in your normal waste bin.

Step 5. Put a new vacuum bag in the place of the old one.

Step 6. Slide the filter of the new vacuum bag open.

Step 7. Put the cover of the vacuum cleaner back on. You can start using the vacuum cleaner again.

The filters are dirty

If the filters of your Bosch vacuum cleaner are dirty, the machine won’t be able to pick up dirt properly. To solve the problem, you will need to wash the filters. Follow the steps below to wash a Bosch vacuum cleaner filter properly . . .

See also  How to Clean Carpet Dog Urine: Your Ultimate Guide

Step 1. Turn your vacuum cleaner off and unplug it from the power outlet before you begin the cleaning process.

Step 2. Disconnect the canister from the vacuum cleaner.

Step 3. Disconnect the filters from the vacuum canister.

Step 4. Separate the filters.

Step 5. Tap the filters on the side of a trash can or sink to get rid of loose dirt.

Step 6. Wash the filters under running water to get rid of stubborn dirt.

Step 7. Leave the filters to dry for about twenty four hours until you’re sure that they are completely dry. Always make sure the filters are completely dry before you put them back into the vacuum cleaner because using the vacuum with a wet filter can cause it to malfunction.

Step 8. When the filters are completely dry, reattach them.

Step 9. Reconnect the filters to the vacuum canister.

Step 10. Reconnect the vacuum canister to the vacuum cleaner.

Note: Ensure that you do not try using the vacuum cleaner without the filters as this could cause the machine to malfunction.

bosch vacuum cleaner suction

The filter needs to be replaced

If the filters of your Bosch vacuum cleaner are bad, the vacuum won’t be able to pick up dirt properly. To solve the problem, you will need to replace the filters. Follow the steps below to replace a Bosch vacuum cleaner filter properly . . .

Step 1. Turn the vacuum cleaner off and unplug it from the power outlet.

Step 2. Disconnect the vacuum canister from the vacuum cleaner.

Step 3. Disconnect the filters from the vacuum canister.

See also  How to Clean Carpet Cleaner Tank: Step-by-Step Maintenance Guide

Step 4. Put new filters in the place of the old ones.

Step 5. Reconnect the vacuum canister to the vacuum cleaner. You can start using the vacuum cleaner again.

Note: Do not use the vacuum without the filters, as it could cause the machine to malfunction.
The vacuum hose is blocked

The hose is blocked

Another thing that can stop your Bosch vacuum cleaner from picking up dirt properly is a clogged hose. To solve the problem, you will need to unclog the hose. Follow the steps below to unclog a Bosch vacuum cleaner hose properly . . .

Step 1. Turn your vacuum cleaner off and unplug it from the power outlet.

Step 2. Disconnect the hose from the vacuum cleaner.

Step 3. Use something like a stick to push out whatever may be clogging the vacuum hose.

Step 4. Reconnect the hose to the vacuum cleaner. Check if the vacuum is working properly by turning it on.

The hose is torn

Another thing that can stop your Bosch vacuum cleaner from picking up dirt properly is a torn hose. To solve the problem, you will need to replace the vacuum hose. Follow the steps below to replace a Bosch vacuum cleaner hose . . .

Step 1. Turn your vacuum cleaner off and unplug it from the power outlet.

Step 2. Disconnect the hose from the vacuum cleaner.

Step 3. Put a new hose in the place of the old one.

Step 4. Check if the vacuum cleaner works properly now.

The extension tube is clogged

Another thing that can stop your Bosch vacuum cleaner from picking up dirt is a clogged extension tube. To solve the problem, you will need to unclog the extension tube. Follow the steps below to unclog the extension tube of your Bosch vacuum cleaner . . .

See also  How To Clean A Pillow Top Mattress

Step 1. Turn your vacuum cleaner off and unplug it from the power outlet.

Step 2. Disconnect the extension tube from the vacuum cleaner.

Step 3. Disconnect the hose from the extension tube.

Step 4. Use a thin and long object to push out whatever may be blocking the tube.

Step 5. Reconnect the extension tube to the vacuum cleaner.

Step 6. Reconnect the hose to the extension tube.

Step 7. Check if the vacuum cleaner works properly now.

The motor needs to be replaced

The final thing that can stop your Bosch vacuum cleaner from picking up dirt properly is a bad motor. To solve the problem, you will need to replace the motor. Follow the steps below to replace the motor of your Bosch vacuum cleaner . . .

Step 1. Turn your vacuum cleaner off and unplug it from the power outlet.

Step 2. Remove the cover of the vacuum cleaner and set it aside.

Step 3. Use a screwdriver to unscrew the screw on the body of the motor.

Step 4. Use the screwdriver to unclip the body of the motor.

Step 5. Remove the cover of the motor and set it aside.

Step 6. Disconnect the power button and set it aside.

Step 7. Slide the electric plug coil out of its place in the rails.

Step 8. Disconnect the motor from the vacuum cleaner.

Step 9. Carefully unwrap the fleece around it.

Step 10. Put a new motor in the place of the old one.

Step 11. Slide the plug coil back through the rails making sure the coil is properly wrapped around the wheel.

Step 12. Slide the power button back in its place. The power button should stick out over the curved groove that goes over the wires.

Step 13. Put the cover of the motor back on.

Step 14. Put the clips of the motor cover back in place.

Step 15. Use the screwdriver to reconnect the screw at the back of the motor cover.

Step 16. Check if your vacuum cleaner works properly now.

Leave a Comment