How To Clean A Bosch Vacuum [Quick Guide]

As you use your Bosch vacuum cleaner, you will need to clean it from time to time. Here’s how to clean a Bosch vacuum cleaner . . .

Table of Contents

How To Clean A Bosch Vacuum Filter

Follow the steps below to clean a Bosch vacuum cleaner filter . . .

Step 1. Turn your vacuum cleaner off and unplug it from the power outlet before you begin the cleaning process.

Step 2. Disconnect the canister from the vacuum cleaner.

Step 3. Disconnect the filters from the vacuum canister.

Step 4. Separate the three filters from each other.

Step 5. Tap the filters on the side of a sink or trash can to get rid of loose dirt.

Step 6. Wash the filters under running water and shake them to get rid of excess water.

Step 7. Leave the filters to dry for about twenty four hours until you are sure that they are completely dry.

Step 8. Reassemble the filters.

Step 9. Reconnect the filters to the vacuum canister.

Step 10. Reconnect the canister to the vacuum cleaner. You can start using the vacuum cleaner again now

Here’s how to clean different parts of a Bosch handstick vacuum cleaner . . .

Follow the steps below to clean the head attachment of a Bosch handstick vacuum cleaner . . .

Step 1. Turn your vacuum cleaner off.

Step 2. Disconnect the head attachment from the vacuum wand.

Step 3. Turn the brush in the head attachment anti clockwise to unlock it then pull it out.

Step 4. Use a dry piece of cloth to get rid of stubborn dirt on the brush.

Step 5. Use a pair of scissors to get rid of thread or hair that may be wound round the brush.

Step 6. Slide the brush through the head attachment again.

Step 7. Turn it clockwise to lock it in place.

Follow the steps below to clean the canister of a Bosch handstick vacuum cleaner. . .

Step 1. Press the release button to disconnect the canister from the vacuum cleaner.

Step 2. Twist the vacuum filter three times to disconnect it from the vacuum cleaner.

Step 3. Empty the vacuum canister.

Step 4. Use a dry piece of cloth to wipe the internal part of the canister.

Step 5. Reconnect the filter to the canister.

Step 6. Reconnect the canister to the vacuum cleaner.