How To Clean A Dirt Devil Vacuum [Quick Guide]

Here’s a quick guide on how to clean a Dirt Devil vacuum cleaner . . .

how to clean a dirt devil vacuum

How To Clean The Filter On A Dirt Devil Vacuum

Follow the steps below to clean the filter of a Dirt Devil vacuum . . .

Step 1. Turn your vacuum off then unplug the power cord from the outlet.

Step 2. Take out the vacuum canister then set it aside.

Step 3. Firmly press the filter cover then take it out.

Step 4. Take out the small black filter.

Step 5. Gently tap the plastic filter on the side of a dustbin or sink to get rid of any loose dirt then brush the foam filter to get rid of dust.

Step 6. Reassemble the filter then keep it back in its place at the bottom of the vacuum.

Step 7. Put the filter cover back on.

Step 8. Put the vacuum canister back in its place then you can start using the vacuum.

How To Clean A Dirt Devil Vacuum Brush

Follow these quick and easy steps to clean a Dirt Devil vacuum brush . . .

Step 1. Turn your vacuum cleaner off then keep it upside down.

Step 2. Use a Phillips head screwdriver to take out the eight screws holding the brush cover in place.

Step 3. Remove the brush cover then take out the roller brush.

Step 4. Cut the ends of the brush roller with scissors.

Step 5. Use a brush to clean the roller brush.

Step 6. Put the rectangular part on both sides of the roller brush.

Step 7. Put the vacuum brush back in its place then put the cover back on. You can start using the vacuum cleaner now.

See also  Black And Decker Vacuum Cleaner Filter [Detailed Guide]

Leave a Comment