How To Clean A Samsung Vacuum [Quick Guide]

Here’s a quick guide on how to clean different part of your Samsung vacuum cleaner properly . . .

How To Clean Samsung Vacuum Filter

Here’s how to clean the filters of a normal Samsung vacuum and a Samsung robot vacuum . . .

How to clean the filter of a Samsung vacuum cleaner

Step 1. Make sure you turn your vacuum cleaner off first before you begin the cleaning process.

Step 2. Press the button on top of the vacuum handle to disconnect the canister from the rest of the vacuum.

Step 3. When you remove the vacuum bin you will see the filter. Take it out and set it aside.

Step 4. Raise the small clip you will see at the back of the filter case.

Step 5. Pull out the blue foam filter.

Step 6. Wash the filter with water and make sure you do not use any form of soap on it.

Step 7. Leave the filter to dry for about twenty four hours until you are sure that it is completely dry.

Step 8. Put the filter back in its case when it is dry then put the case back in its place.

Step 9. Reconnect the canister to the vacuum and you can start using it again.

See also  How to Clean Carpet of Cat Urine: A Step-by-Step Guide

How to clean the filter of a Samsung robot vacuum cleaner

Step 1. Make sure your vacuum cleaner is off before you begin the cleaning process.

Step 2. Push the button on top of the vacuum to disconnect the canister from the vacuum.

Step 3. Take the vacuum canister out then take out the filter.

Step 4. Wash the filter under a tap and make sure you do not use any cleaning agents on it.

Step 5. Leave the filter to dry for about twenty four hours until you are sure that it is completely dry.

Step 6. When the filter is dry, put the filter back in its case then put the case back in the vacuum canister.

Step 7. Put the vacuum canister back in its place and you can start using your vacuum cleaner again.

how to clean a samsung vacuum filter

How To Clean A Samsung Robot Vacuum

Here’s how to clean a Samsung vacuum bin and brush . . .

How to clean a Samsung vacuum bin

Step 1. Make sure your vacuum is switched off before you begin the cleaning process.

Step 2. Press the button on top of the vacuum cleaner to disconnect the bin then carefully remove it.

Step 3. Disconnect the filter from the vacuum canister then set the filter aside.

Step 4. Empty any dirt that may be in the canister into your dustbin.

Step 5. Wash the canister under a tap and make sure you do not use any cleaning agents on it.

Step 6. Wait for the canister to dry completely then reconnect the filter to it and put it back in its place in the vacuum. You can start using your vacuum cleaner now.

See also  How to Clean Carpet of Cat Urine: A Step-by-Step Guide

How to clean a Samsung vacuum brush

Step 1. Turn your vacuum off before you begin the cleaning process.

Step 2. Flip the vacuum over and leave it upside down.

Step 3. Push the yellow clips at the bottom of the vacuum upward to disconnect the brush cover.

Step 4. Take out the brush cover.

Step 5. Pull the brush out from the left side of the vacuum

Step 6. Use a piece of cloth to wipe the brush clean.

Step 7. Pull the shutter upwards and wipe it as well.

Step 8. Push the shutter down again then put the brush back in its place and make sure to put the square end in first.

Step 9. Put the brush cover back on then push the yellow clips downward to lock. You can start using your vacuum again.

Leave a Comment