If your Black and Decker vacuum has charging problems, you’re in the right place. Here we’ll identify the problem your vacuum cleaner has and show you possible solutions. . .
Table of Contents
Black And Decker Vacuum Cleaner Charger Not Working – Why and How To Fix
If the charger of your Black and Decker vacuum cleaner isn’t working, the problem could be that the vacuum battery is overheating. To solve the problem, leave the vacuum to cool down for about thirty minutes.
After leaving it to cool down, your Black and Decker vacuum cleaner charger should start working properly again.
Black And Decker Vacuum Cleaner Charging Time
A Black and Decker vacuum cleaner can take about ten hours to charge if the battery is completely dead.
Black And Decker Handheld Vacuum Cleaner Charge Time
A Black and Decker handheld vacuum cleaner can take about four hours to get fully charged.
Black And Decker Cordless Vacuum Cleaner Charger Blinking Red – Why and How To Fix
If your Black and Decker cordless vacuum cleaner has a blinking red light on the charger, the machine could have one of two problems. Keep on reading to figure out the problem your Black and Decker cordless vacuum cleaner might have . . .
The vacuum cleaner battery is overheating
If the battery of your Black and Decker vacuum cleaner is overheating, the charger will display a blinking red light to warn you. To solve the problem, leave the vacuum cleaner to cool down for about thirty minutes. After leaving the vacuum cleaner to cool down for a while, the flashing red light should disappear.
To stop your Black and Decker cordless vacuum cleaner battery from overheating in the first place, make sure you do not charge the machine in a place that is over 105 degrees fahrenheit or in a place that is under 40 degrees fahrenheit.
If you charge your Black and Decker vacuum cleaner under the right temperatures, the machine shouldn’t overheat again.
The vacuum cleaner battery is bad
If the battery of your Black and Decker cordless vacuum cleaner is bad, the vacuum charger will display a flashing red light to warn you.
To solve the problem, you will need to replace the vacuum cleaner battery. Follow the steps below to replace your Black and Decker cordless vacuum cleaner battery properly . . .
Step 1. Wait for the battery to drain completely before you begin. It can be dangerous to replace your Black and Decker vacuum cleaner battery when it is still fully charged.
Step 2. Turn the vacuum cleaner off and unplug it from the power outlet before you begin. Never work on your Black and Decker vacuum cleaner when it is turned on or plugged into the power outlet.
Step 3. Make sure you put a pair of gloves on while replacing the battery because it might be damaged and leaking. Also remember to clean your hands properly afterwards.
Step 4. Flip the vacuum cleaner over and lay it on a flat surface.
Step 5. Take out the screws near the bottom of the handle of the vacuum cleaner.
Step 6. Near the place where the screws were taken out of, you will see two plastic tabs. Push the two tabs to disconnect the underside of the vacuum cleaner from the rest of the machine.
Step 7. Take out the screws holding the battery in place. Keep the screws in a safe place.
Step 8. Take the old battery out of the back of the vacuum cleaner and set it aside.
Step 9. To dispose of the battery, you will need to recycle it.
Step 10. Put a new battery in the place of the old one using the old screws to hold it in place.
Step 11. Put the underside of the vacuum cleaner back in its place and use the screws to lock it in place.
Step 12. Flip the vacuum cleaner over again.
Step 13. Charge the vacuum cleaner for about four hours until it is fully charged. Turn the vacuum cleaner back on and check if it is working like it is supposed to now.
Black and Decker Vacuum Cleaner Won’t Charge
If your Black and Decker vacuum cleaner isn’t charging, the machine could have one of many problems. Keep on reading to figure out the problem your Black and Decker vacuum cleaner has . . .
The power cord isn’t properly connected to the power outlet
If the power cord of your Black and Decker vacuum cleaner isn’t properly connected to the power outlet, the machine won’t be able to charge properly. To solve the problem, you will need to connect the power cord to the power outlet properly.
After connecting the power cord to the power outlet, your Black and Decker vacuum cleaner should start charging like it is supposed to now.
The power cord isn’t properly connected to the vacuum cleaner
If the power cord of your Black and Decker vacuum cleaner isn’t properly connected to the vacuum, the machine won’t be able to charge properly. To solve the problem, connect the power cord to the vacuum cleaner properly.
After connecting the power cord properly, your Black and Decker vacuum cleaner should start charging like it is supposed to.
The power outlet wasn’t turned on
If the power outlet being used to charge your Black and Decker vacuum cleaner isn’t turned on, the machine won’t be able to charge. To solve the problem, turn the power outlet on. After turning the power outlet on, your Black and Decker vacuum cleaner should start charging like it is supposed to now.
The power outlet is bad
If the power outlet that is being used to charge your Black and Decker vacuum cleaner is bad, the machine won’t be able to charge properly. To solve the problem, you will need to call an electrician to replace the power outlet for you.
After replacing the power outlet, your Black and Decker vacuum cleaner should start charging like it is supposed to now.
The power cord might be damaged
If the power cord of your Black and Decker vacuum cleaner is damaged, the machine won’t be able to charge properly. To solve the problem, you will need to replace the vacuum cleaner charger. After replacing the power cord, your Black and Decker vacuum cleaner should start charging like it is supposed to now.
The vacuum cleaner was turned on
If your Black and Decker vacuum cleaner was turned on while you were charging it, the machine won’t be able to charge properly. To solve the problem you will need to turn the vacuum cleaner off. After turning the machine off, your Black and Decker vacuum cleaner should start charging like it is supposed to.
Black And Decker Cordless Vacuum Cleaner Charging Time
A Black and Decker cordless vacuum cleaner can take about four hours to get fully charged.
How To Charge A Black And Decker Cordless Vacuum Cleaner
Follow the steps below to charge your Black and Decker cordless vacuum cleaner properly . . .
Step 1. Turn the vacuum cleaner off before you begin. Do not attempt to charge your Black and Decker cordless vacuum cleaner when it is turned on.
Step 2. Plug the vacuum cleaner into the power outlet then turn the power outlet on.
Step 3. Leave the vacuum cleaner to charge for about four to five hours. You can tell the vacuum cleaner is charging when you see the power indicator light flashing.
Step 4. Once the vacuum cleaner is fully charged, unplug it from the power outlet. You can tell that the vacuum cleaner is fully charged when the power indicator light stops flashing.
Step 5. After charging it, you can start using your Black and Decker vacuum cleaner now.
Black And Decker Vacuum Cleaner Won’t Hold Charge
If your Black and Decker vacuum cleaner won’t hold charge, the problem could be that the battery has worn out. To solve the problem, you will need to replace the battery. After replacing your Black and Decker vacuum cleaner battery, your machine should start working like it is supposed to now.
Black And Decker Lithium Hand Vacuum Cleaner Charge Time
A Black and Decker lithium hand vacuum cleaner can take about ten hours to charge when the battery has been completely drained.
Black And Decker Robot Vacuum Cleaner Not Charging – Why and How To Fix
If your Black and Decker robot vacuum cleaner isn’t charging, the problem could be that some parts of the machine are dirty. To solve the problem, you will need to clean the vacuum cleaner. Follow the steps below to clean your Black and Decker robot vacuum cleaner properly . . .
Step 1. Turn the vacuum cleaner off and unplug it from the power outlet before you begin the cleaning process. Never clean your Black and Decker robot vacuum cleaner when it is turned on or plugged into the power outlet.
Step 2. Flip the vacuum cleaner over.
Step 3. Use a damp piece of cloth or tissue to clean the metal contacts at the bottom of the vacuum cleaner.
Step 4. If the metal contacts are extremely dirty, you can clean it with steel wool.
Step 5. Wipe the underside of the vacuum cleaner with a dry piece of cloth or tissue. Clean the charging station as well.
Another thing that can stop your Black and Decker robot vacuum cleaner from charging properly is a bad charging station. Check if the charging station is working properly by trying to wiggle the spring on top of it. If the spring is stuck, you will need to replace the charging station. After replacing the charging station, your Black and Decker robot vacuum cleaner should start charging like it is supposed to now.
