Dyson Vacuum Filter [Problems & Solutions]

If your Dyson vacuum has any problems with the filter, you’ve come to the right place. Here we show you how to identify and solve the problem your vacuum filter might have . . .

Dyson Vacuum Filter Not Sealed — How To Fix

If your Dyson vacuum cleaner sends you a message telling you that the filter isn’t sealed, you will have to locate the filter( the filter location will vary depending on the model of your vacuum ) and take it out. When you take out the filter, push it back into the vacuum until it clicks in place, and the message shouldn’t be there anymore.

Dyson Vacuum Filter Light Always On — Why and How To Fix

If your Dyson vacuum filter light stays on even after you turn the vacuum off, it could have one of the two problems. Keep on reading so that you can identify and solve the problem that your Dyson vacuum has . . .

1 The filter might need to be washed

If your Dyson vacuum filter is dirty, the filter light will come on to warn you. To solve the problem you will need to wash the vacuum filter. If you want to learn how to wash a Dyson vacuum filter properly, go to the link below.
How To Clean A Dyson Vacuum [Detailed Guide] – Dyson Vacuum Rev How To Clean A Dyson Vacuum [Detailed Guide]

See also  How to Clean Up Blood

If you wash the filter but the light still stays on, check your vacuum for this problem . . .

2 The vacuum attachments might be dirty

If your Dyson vacuum attachments are dirty, the filter light will come on to warn you. To solve the problem, check all the parts of your vacuum that you can disconnect for dirt and if you do find dirt, put your hand inside and remove it.

If you have checked for these two problems and the filter light still stays on, your vacuum might have another problem. If you can’t identify the problem, contact Dyson support for help.

Dyson Vacuum Filter Light Flashing After Cleaning — Why and How To Fix

If your Dyson filter light flashes when you just finished cleaning it, the problem could be that the filter isn’t fitted in properly. To solve the problem, all you have to do is to push the filter down until you hear it click.

How To Wash A Dyson Vacuum Filter

Follow these quick and easy steps to wash a Dyson vacuum filter . . .

Step 1. Remove the filter from the vacuum cleaner.

Step 2. Gently tap the filter on the side of a dust bin or sink to get rid of any loose dust.

Step 3. Wash the filter with cold water while rubbing it gently with your hands. Do not use detergent on it.

Step 4. Fill the filter with warm water and cover the open ends with your hands

Step 5. Shake the filter to get rid of any dust that may be stuck in it. Repeat the process until the water in the filter comes out clean.

Step 6. Leave the filter to dry in an airy place for about 24 hours until you are sure that it is completely dry.

Step 7. Put the filter back into the vacuum cleaner and you can start using it again.

How To Replace A Dyson Vacuum Filter

Here’s how to replace different Dyson vacuum filters . . .

How to replace the filter of a Dyson stick cordless vacuum

Follow these quick and easy steps to replace the filter of your Dyson stick cordless vacuum . . .

See also  How To Clean A Bosch Vacuum [Quick Guide]

Step 1. Turn your Dyson vacuum cleaner off.

Step 2. Pull out the old filter. You will find it on top of the vacuum canister.

Step 3. Get a new filter and put it in the place of the old filter, and you’re done.

How to replace the filter of a Dyson animal upright vacuum

Here’s how to replace the filter of your Dyson animal upright vacuum . . .

Step 1. Turn your vacuum off then unplug.

Step 2. Disconnect the vacuum bin from the rest of the vacuum.

Step 3. Pull up the handle that is labeled “filter“ then pull the filter out of the vacuum bin.

Step 4. Get a new filter and put it in the place of the old filter.

Step 5. The second filter will be the vacuum ball. Rotate the wheel to unscrew it.

Step 6. Rotate the filter until it comes out.

Step 7. Get another filter and put it in the place of the old filter, rotating it until secured properly.

Step 8. Cover the ball and secure it properly. You can start using the vacuum cleaner now.

How to replace the filter of a Dyson canister vacuum

Here’s how to replace the filter of your Dyson canister vacuum . . .

Step 1. Turn the vacuum cleaner off.

Step 2. Disconnect the cylinder from the rest of the vacuum.

Step 3. Remove the filter from the cylinder.

Step 4. Get a new filter and put it in the place of the old one

Step 5. Reconnect the cylinder to the rest of the vacuum.

Step 6. The second filter will be in the ball of the vacuum.

Step 7. Rotate the ball counter clockwise until it opens up.

Step 8. Push the two tabs in the ball until the filter pops out.

Step 9. Get a new filter and push it into the place of the old filter until you hear it click.

Step 10. Put the cover of the ball back in its place, and you can start using your vacuum now.

Where Is The Filter On A Dyson Vacuum?

Most Dyson vacuum filters can be found near the cyclone head. You can easily take the filter out to clean it. The filters have a dark blue color so they shouldn’t be hard to find, but in some Dyson upright vacuums, you will need to look for two filters.

See also  How to Clean a Whole Carpet by Hand: The Ultimate DIY Method
dyson vacuum filter

Does Dyson Vacuum Have A Filter?

Yes, all Dyson vacuums have a filter near the cyclone head but some Dyson upright vacuums have more than one filter.

Do You Have To Change The Filter On Dyson Vacuum?

Yes, you need to replace your Dyson vacuum filter once a year to make your cleaning more effective, but if your floors are dirtier than normal, you will need to replace the filter more often.

Dyson Vacuum Filter Smells After Washing – – Why?

If your Dyson vacuum filter smells after washing it, it could have one of the two problems. Keep on reading to find out the problem your filter might have . . .

The filter might not be completely dry

If you don’t leave your vacuum filter to dry for at least twenty four hours before putting it back into your machine, the water in it might not be gone completely and the dampness will cause it to smell. Always make sure your filter is completely dry before putting it back in your vacuum because putting a wet filter in your Dyson vacuum can cause it to malfunction.

You might have used some cleaning products on it

If you use any cleaning products like detergents on your Dyson vacuum filter, it will start to smell. This is why you should wash your filter with only cold tap water.

Is Dyson Vacuum Filter Washable?

Yes, you can wash your Dyson vacuum filter once every month or if the machine sends you a message telling you that the filter is blocked. Just make sure you wash the filter with cold water only and without any cleaning products.

Dyson Vacuum Filter Keeps Popping Out – – Why?

If your Dyson vacuum filter keeps popping out, the problem could be that the airways are blocked with carbon dust. As the motor blows powerfully, the air will need somewhere to go to and since the airways are blocked with carbon dust, the air blows the filter out.

How Long Do Dyson Vacuum Filters Last?

A Dyson vacuum filter can last up to twelve months if used properly. After twelve months, you should replace your filter because if you leave it longer than that the filter can easily get clogged with pollutants and it can send unpleasant odors back into your room.

Dyson Vacuum Filter Not Working — Why?

If your Dyson vacuum filter isn’t working, the problem could be that you didn’t install the filter properly or that you didn’t leave the filter to dry completely after you washed it. Check your filter for one of these problems. If you are sure that the vacuum doesn’t have any of the problems listed above, your vacuum might have another problem. You will need to contact Dyson support for help.

Dyson Vacuum Filter Says Not Sealed — How To Fix

If your Dyson vacuum sends you a message telling you that it is not sealed, to solve the problem, you will need to take out the filter and then push it back in its place until you hear it click.

How To Put The Filter Back In Dyson Vacuum

To put your filter back into your Dyson vacuum, simply push it back into the place you brought it out of until it locks with a click.

Do Dyson Vacuums Need Filters?

Yes, Dyson vacuums need filters to make your cleaning effective.

Can You Buy A Replacement Filter For Dyson Vacuum?

Yes, you can buy a replacement filter for your Dyson vacuum because you will need to replace the filter once every year.

Leave a Comment