Dyson Vacuum Work [Issues, Solutions & Guide]

Here we will help you with any problem you might encounter when working your Dyson vacuum . . .

Dyson Vacuum Works For Ten Seconds — Why and How To Fix

If your Dyson vacuum works for only ten seconds, it could have one of many problems. Keep on reading to figure out the problem your Dyson vacuum might have . . .

1 Make sure the battery is fully charged

If your vacuum isn’t fully charged, it won’t be able to work properly. To solve the problem, charge the vacuum until it is full. Here are some other things to keep in mind when charging your Dyson vacuum . . .

. Always make sure the vacuum is plugged in properly. If you don’t plug the vacuum in properly, the battery won’t be able to charge well.

. You will need to charge the battery regularly if you use the vacuum a lot. The battery life of
Dyson cordless vacuums reduce over time.

. If you are using a Dyson cordless vacuum, always unplug the vacuum before you turn it on. The vacuum won’t be able to come on if it is still plugged in when you want to use it.

See also  Electrolux Vacuum Cleaner Working [Problems and Solutions]

2 The power outlet might be bad

If you are sure that the battery is fully charged, the problem might be that the power outlet you used was bad. Check if the power outlet is bad by moving the vacuum to another outlet. If the power outlet is bad, call an electrician to fix it for you.

3 The vacuum hasn’t been used in a while

If your vacuum hasn’t been used in a while, it won’t come on when you press the power button normally. To solve the problem, press and hold the power button for ten seconds then press it again normally.

dyson vacuum work

4 The docking station might be the problem

If your docking station is bad, the vacuum won’t be able to charge properly and it won’t be able to come on. To solve the problem, you will have to replace the docking station. To replace a Dyson vacuum docking station, follow the steps below . . .

Step 1. Disconnect the old docking station from the wall.

Step 2. Get the new parts of a docking station.

Step 3. Secure the backplate with the right screws.

Step 4. Position the jack plug on the front casing.

Step 5. Ensure that the charger cable is properly secured behind the front casing.

Step 6. Push the jack cover down to secure the jack plug.

Step 7. Connect the front casing to the backplate. Push it to secure.

Step 8. Plug the charger into your power outlet.

Step 9. Hang the vacuum on the docking station.

Step 10. Leave the vacuum to charge.

See also  How to Clean Carpet on a Boat: 3 Steps for a Fresh Vessel

5 Some parts of the vacuum might be blocked

If any part of your Dyson vacuum is clogged, the vacuum won’t be able to function properly. To solve the problem. Check every part of the vacuum that can be disconnected for dust and if you find anything, put your hand inside and take it out.

6 The filter might be dirty

If the filter of your Dyson vacuum is dirty, it won’t be able to work well. To solve the problem you will need to wash the filter. Follow the steps below to wash a Dyson vacuum filter . . .

Step 1. Remove the filter from the vacuum cleaner

Step 2. Gently tap the filter on the side of a dustbin or sink to get rid of any loose dust.

Step 3. Wash the filter with cold water while rubbing it gently with your hands. Do not use detergents on it.

Step 4. Cover the open ends of the filter with your hands then fill it with warm water.

Step 5. Shake the filter to get rid of any dirt that may be stuck in it. Repeat the process until the water comes out clean.

Step 6. Dry the filter in an airy place for about a day until the filter is completely dry. Always make sure the filter is completely dry before putting it back into the vacuum because using your vacuum with a wet filter can cause it to malfunction.

Step 7. When the filter is dry, put it back into the vacuum cleaner and it should start working properly again.

See also  How To Clean A Dyson
dyson vacuum filter

7 The battery might be bad

If the battery of your Dyson vacuum is bad, the vacuum won’t be able to function properly. To solve the problem, you will need to replace the battery. Here’s how to replace a Dyson vacuum battery.

If you have checked the vacuum for all these problems but it still doesn’t work for long, your vacuum might have another problem. If you can’t identify the problem, contact Dyson support for help.

Does The Dyson Vacuum Work On Carpets?

Yes, you can use Dyson vacuums on carpets but not all Dyson vacuums work on carpets. This is why the best kind of Dyson vacuum to buy is the Dyson v15 detect vacuum if you want to clean thick and thin carpets. This vacuum is also good for cleaning pet hair and fine debris.

Dyson Vacuum Works For Only A Few Minutes — Why and How To Fix

If your Dyson vacuum works for only a few minutes, the problem could be that the vacuum battery is bad. To solve the problem, you will need to replace the battery. Here’s how to replace a Dyson vacuum battery

Does Dyson Vacuum Work On Hardwood Floors?

Yes, Dyson vacuums can clean hardwood floors but to do that, you will need to use the soft brush attachment which is specially designed for hardwood floors.

Leave a Comment