Hoover Vacuum Cleaner Charging [Problems, Solutions and Guide]

If your Hoover vacuum cleaner has charging problems, this article is for you. Here, we will help you find the issue your Hoover vacuum has . . .

Hoover Vacuum Cleaner Charger Not Working – Why and How To Fix

If the charger of your Hoover vacuum cleaner isn’t working, the problem could be that it has gone bad. To solve the problem, you will need to buy a new charger to replace the old one.

Hoover Vacuum Cleaner Not Charging – Why and How To Fix

If your Hoover vacuum cleaner isn’t charging, the machine could have one of many problems. Keep on reading to figure out and to solve the problem your Hoover vacuum cleaner has . . .

The temperature is too high or too low

If the temperature of the place where you are charging your Hoover vacuum cleaner is too high or too low, the machine won’t be able to charge properly. To solve the problem, move the vacuum cleaner to a place with a more suitable temperature ( between 5 degrees to 40 degrees celsius ) and the machine should start charging properly again.

The power cord wasn’t properly connected to the power outlet

If the power cord of your Hoover vacuum cleaner isn’t properly connected to the power outlet, the machine won’t be able to charge properly. To solve the problem, you will need to connect the power cord to the power outlet properly.

After properly connecting the power cord to the power outlet, check if your Hoover vacuum cleaner is charging properly now.

The power outlet has gone bad

If the power outlet that is being used to charge your Hoover vacuum cleaner has gone bad, the machine won’t be able to charge properly. Check if the power outlet has gone bad by plugging another appliance into it.

If you’re sure that the power outlet has gone bad, you will need to call an electrician to fix it for you. After fixing the power outlet, turn your Hoover vacuum cleaner back on and check if it is charging properly now.

See also  Dyson Vacuum Smells [Quick Fix]
power outlet


The power cord has gone bad

If the power cord of your Hoover vacuum cleaner has gone bad, the machine won’t be able to charge properly. To solve the problem, you will need to buy another Hoover vacuum cleaner charger of the same kind to replace the old one.

After replacing the power cord of your Hoover vacuum cleaner, check if the machine is charging properly now.


The battery is bad

If the battery of your Hoover vacuum cleaner is bad, the machine won’t be able to charge properly. To solve the problem, you will need to replace the vacuum battery. Here’s how to replace the battery of your Hoover vacuum cleaner.

After replacing the battery of your Hoover vacuum cleaner, turn the machine back on and check if it is charging properly now.

Hoover Presto 2 in 1 Stick Cordless Vacuum Cleaner Not Charging – Why and How To Fix

If your Hoover presto 2 in 1 stick cordless vacuum cleaner isn’t charging, the problem could be that the battery of the charging station has gone bad. To solve the problem, you will need to replace the battery. Follow the steps below to replace the charging station battery of your Hoover presto 2 in 1 stick cordless vacuum cleaner . . .

Step 1. Make sure your vacuum cleaner is turned off and unplugged from the power outlet before you begin the replacement process. Replacing any part of your Hoover presto 2 in 1 stick cordless vacuum cleaner when the machine is plugged into the power outlet can cause electrocution.

Step 2. Separate the standing charger from the floor charger attachment. Set the standing charger aside.

Step 3. Flip the floor charger over.

Step 4. Get a Phillips head #1 screwdriver and use it to take out the two screws on the right side of the floor charger. Keep the screws in a safe place.

Step 5. Get a Phillips head #2 screwdriver and use it to take out the three screws at the left side of the floor charger. Keep the screws in a safe place and do not mix them with the first two screws that you removed.

Step 6. Get a flathead screwdriver and use it to lift up the little plastic cover on the upper right hand side of the floor charger. Keep the plastic cover in a safe place.

Step 7. Get a Phillips head #1 screwdriver and use it to take out the hidden screw. Keep the screw in a safe place.

Step 8. Get the flathead screwdriver and use it to carefully pry open the cover of the floor charger.

Step 9. Separate the cover of the floor charger from the rest of the charger and set it aside.

Step 10. Get the Phillips head #1 screwdriver and use it to take out the two screws holding the battery cover in place. Keep the screws in a safe place and make sure to separate them from the screws that you removed earlier.

See also  How to Deep Clean Carpet at Home: The Ultimate DIY Method

Step 11. Take the battery cover out of the floor charger and set it aside.

Step 12. Take the old battery out of the floor charger and set it aside.

Step 13. Get a new Hoover vacuum cleaner charging station battery and put in the place of the old one. Make sure to lock the new battery in place properly.

Step 14. Reconnect the battery cover to the floor charger and use the two screws that you removed from it earlier to lock it in place properly.

Step 15. Reconnect the cover of the floor charger to the rest of the charger and then use the screws that you removed earlier to lock it in place properly.

Step 16. Reconnect the plastic cover that you removed from the hidden screw to the cover of the floor charger.

Step 17. Flip the floor charger over again and reconnect the standing charger to it. Make sure to lock the standing charger in place properly.

Step 18. Reconnect your Hoover presto 2 in 1 stick cordless vacuum cleaner to the charging station and check if the station is working like it is supposed to now.

Hoover Impulse Cordless Vacuum Cleaner Not Charging – Why and How To Fix

If your Hoover impulse cordless vacuum cleaner isn’t charging, the problem could be that the machine was switched on when you tried charging it. Your Hoover impulse cordless vacuum cleaner won’t be able to charge if it is switched on.

To solve the problem, turn your Hoover impulse cordless vacuum cleaner off and check if it is charging properly now.

Hoover Robot Vacuum Cleaner Not Charging – Why and How To Fix

If your Hoover robot vacuum cleaner isn’t charging, the machine could have one of two problems. Keep on reading to figure out and to solve the problem your Hoover robot vacuum cleaner has . . .

The charging station has gone bad

If the charging station of your Hoover robot vacuum cleaner has gone bad, the machine won’t be able to charge properly. To solve the problem, you will need to buy a new Hoover robot vacuum charging station to replace the old one.

After replacing the charging station of your Hoover robot vacuum cleaner, check if the machine is charging properly now.

The vacuum cleaner is dirty

If your Hoover robot vacuum cleaner is dirty, the machine won’t be able to charge properly. To solve the problem, you will need to clean the vacuum cleaner. Follow the steps below to clean different parts of your Hoover robot vacuum cleaner . . .

How to clean the filter of a Hoover robot vacuum cleaner

Follow the steps below to clean the filter of your Hoover robot vacuum cleaner . . .

See also  How to Use Shark Vacuum Cleaner [Detailed Guide]

Step 1. Make sure your vacuum cleaner is turned off and unplugged from the power outlet before you begin the cleaning process. Cleaning any part of your Hoover robot vacuum cleaner when the machine is turned on or plugged into the power outlet can cause electrocution.

Step 2. Take the filter cover out of the vacuum cleaner and set it aside.

Step 3. Tap the filter on the side of a trash can or sink to get rid of loose dust and debris.

Step 4. Wipe the filter with a dry piece of cloth or tissue or soft brush to clean it.

Step 5. When it is completely clean, reconnect the filter to the vacuum cleaner and make sure to lock it in place properly.

Step 6. Reconnect the filter cover to the vacuum cleaner and make sure to lock it in place properly.

Step 7. Reconnect your Hoover robot vacuum cleaner to the charging station and check if it is charging properly now.

How to clean the brush roller of a Hoover robot vacuum cleaner

Follow the steps below to clean the brush roller of your Hoover robot vacuum cleaner . . .

Step 1. Ensure that your machine is turned off and unplugged from the power outlet before you begin the cleaning process. Cleaning any part of your Hoover robot vacuum cleaner when the machine is turned on or plugged into the power outlet can cause electrocution.

Step 2. Flip the vacuum cleaner over to gain access to the brush roller.

Step 3. Take the brush roller cover out of the vacuum cleaner and set it aside.

Step 4. Take the brush roller out of the vacuum cleaner and then set the rest of your machine aside.

Step 5. Get a pair of scissors and use it to cut off any hair or thread that may be stuck on the brush roller. Take the hair or thread out of the vacuum cleaner brush and throw it away.

Step 6. If necessary, wipe the internal part of the brush roller chamber with a dry piece of cloth or tissue. Wipe the brush roller cover as well.

Step 7. When it is completely clean, reconnect the brush roller to the vacuum cleaner and make sure to lock it in place properly.

Step 8. Reconnect the brush roller cover to the vacuum cleaner and make sure to lock it in place properly.

Step 9. Reconnect your Hoovcer robot vacuum cleaner to the charging station and check if it is charging properly.

How To Charge Hoover Vacuum Cleaner

Follow the steps below to charge the battery of your Hoover vacuum cleaner . . .

Step 1. Make sure your vacuum cleaner is turned off before you begin the charging process. Charging your Hoover vacuum cleaner when the machine is turned on can cause electrocution.

Step 2. Connect the power cord to the power outlet and turn it on.

Step 3. Connect the vacuum cleaner to the charging station.

Step 4. Leave the vacuum cleaner to charge for about three hours. You can tell that your Hoover vacuum cleaner is charging when you see the power indicator light come on.

Step 5. Disconnect the vacuum cleaner from the charging station and turn the power outlet off once the machine is fully charged. You can tell that your Hoover vacuum cleaner is fully charged when you see the power indicator light turn blue.

Step 6. Turn your Hoover vacuum cleaner and you can start cleaning with it again.

Hoover Magic Stick Vacuum Cleaner Charging Time

It can take your Hoover magic stick vacuum cleaner up to 6 hours to get fully charged .

Leave a Comment