How To Use A Hoover Vacuum Cleaner [Detailed Guide]

When you get a Hoover vacuum cleaner, you will need to learn how to use it. Here we will show you how to use your Hoover vacuum cleaner. . .

How To Use A Hoover Vacuum Cleaner

Follow the steps below to learn how to use different types of Hoover vacuum cleaners . . . .

How to use a Hoover 500 reach vacuum cleaner

Follow the steps below to use your Hoover 500 reach vacuum cleaner properly . . .

Step 1. Unclip the hose from the vacuum cleaner.

Step 2. Turn the vacuum cleaner backwards. At the back of the vacuum cleaner, you will see a little flap. Open the little flap then connect the hose to it. Make sure to lock the hose in place properly.

Step 3. Connect any accessory of your choice to the end of the vacuum hose. Make sure to lock the attachment in place properly.

Step 4. After cleaning, disconnect the accessory from the vacuum hose then set it aside.

Step 5. Reconnect the vacuum hose to its chamber in the vacuum cleaner.

Step 6. Turn the vacuum cleaner off and keep it in a safe space. You can start using your Hoover 500 reach vacuum cleaner now.

How to use a Hoover commercial tack vac lightweight bagless upright vacuum cleaner

Follow the steps below to use your Hoover commercial tack vac lightweight bagless upright vacuum cleaner . . .

Step 1. Turn the vacuum cleaner on then set the height adjustment to your desired setting.

Step 2. Step on the little pedal at the back of the vacuum cleaner with your foot to recline it backwards. You can start using your Hoover commercial task vac lightweight bagless upright vacuum cleaner now.

See also  How to Keep Carpet Clean with Dogs: Expert Advice for Dog Owners

How to use a Hoover carpet cleaner

Follow the steps below to use your Hoover carpet cleaner properly . . .

Step 1. Get a carpet cleaning solution suitable for the carpet cleaner. Do not use homemade cleaning solutions like baking soda or vinegar on the carpet cleaner.

Step 2. Move all the furniture out of the area that you want to clean.

Step 3. Vacuum the space that you want to clean thoroughly before using the carpet cleaning on it.

Step 4. Fill the clean water tank with hot water.

Step 5. Add some of the cleaning solution to the water tank.

Step 6. Press the pedal at the back of the carpet cleaner to recline it backwards.

Step 7. Press the button on the bottom of the carpet cleaner handle and move the machine forwards slowly to spray some water on the carpet. Do not leave the carpet cleaner on one spot for too long because doing so can cause the carpet to get soaked.

Step 8. Empty the dirty water tank once it is full to keep the carpet cleaner running properly.

Step 9. To disconnect the dirty water tank from the carpet cleaner, press the button on the top part of it then separate it from the rest of the machine.

Step 10. Empty the dirty water tank into a sink then rinse it out with some water.

Step 11. Reconnect the tank to the carpet cleaner once it is completely clean. Make sure to lock the rank in place properly. You can start using your Hoover carpet cleaner now.

how to use hoover vacuum cleaner

How To Use A Hoover Dual Power Max Pet Vacuum Cleaner

Follow the steps below to use your Hoover dual power max pet vacuum cleaner properly . . . .

Step 1. Disconnect the clean water tank from the vacuum cleaner. Set the rest of the vacuum cleaner aside.

Step 2. Open the little cap on the top part of the clean water tank.

Step 3. Fill the clean water tank with warm water then add about three ounces of the Paws and Claws cleaning solution to the water.

See also  Easy Steps on How to Clean Area Rug: A Practical Guide

Step 4. Close the lid of the clean water tank.

Step 5. Reconnect the clean water tank to the vacuum cleaner and make sure to lock it in place properly.

Step 6. Press the white pedal at the back of the vacuum cleaner with your foot to recline it backwards.

Step 7. Press the red pedal at the back of the vacuum cleaner to turn it on.

Step 8. Press the little button at the bottom of the vacuum cleaner handle to start spraying water from the vacuum cleaner.

Step 9. Slowly push the vacuum cleaner forward to clean then slowly pull it back rto dry the area you cleaned.

Step 10. To use the spots and stains pet tool, open the little tab at the bottom of the vacuum cleaner then connect the hose to the little port there. Make sure to lock the hose in place properly.

Step 11. Connect the spots and stains tool to the other end of the vacuum hose and make sure to lock it in place properly.

Step 12. Hold the attachment over the area that you want to clean then press the trigger at the bottom of the vacuum hose to spray water on it.

Step 13. After spraying water on the area that you wish to clean, use the brush at the bottom of the spots and stains attachment to the scrub the the place that you want to clean.

Step 14. Finally, tip the attachment forwards then pull it back slowly to remove the dirt and water from the area that you are cleaning. You can start using your Hoover dual power max pet vacuum cleaner now.

How To Use A Hoover Floormate Hard Floor Vacuum Cleaner

Follow the steps below to use your Hoover Floormate hard floor vacuum cleaner properly . . .

Step 1. Turn the vacuum cleaner on.

Step 2. Turn the dial at the bottom of the vacuum cleaner to set it to the vacuum mode.

See also  How to Clean Carpet on Stairs: A Step-by-Step DIY Guide

Step 3. After setting the vacuum cleaner to the vacuum mode, use the machine to get rid of dust and debris that may be on the floor.

Step 4. After getting rid of the dust and debris on the floor, disconnect the clean water tank from the vacuum cleaner then fill it with warm water.

Step 5. Pour some of your Hoover multi floor cleaning solution into the water tank.

Step 6. Reconnect the clean water tank to the vacuum cleaner.

Step 7. To start cleaning the floor with water, turn the dial at the bottom of the vacuum cleaner to the wash mode.

Step 8. Press the button at the bottom of the vacuum cleaner handle then push the machine back and forth to get rid of stubborn stains on your floor.

Step 9. When you are done washing the floor, turn the dial at the bottom of the vacuum cleaner to the dry mode and then push the machine back and forth to dry the area that you just cleaned.

Step 10. Press the button in the middle of the dirty water tank to disconnect it from the vacuum cleaner.

Step 11. Take the dirty water tank out of the vacuum cleaner then empty it into a sink.

Step 12. Wash the dirty water tank thoroughly with only water then reconnect it to the vacuum cleaner. Make sure to lock the tank in place properly. You can start using your Hoover floormate hard floor vacuum cleaner now.

How To Charge A Hoover Vacuum Cleaner

Follow the steps below to charge your Hoover vacuum cleaner . . .

Step 1. Turn the vacuum cleaner off before you start the charging process.

Step 2. Connect the power cord to the power outlet then turn the outlet on.

Step 3. Connect the power cord to the vacuum cleaner.

Step 4. Leave the vacuum cleaner to charge for about six hours. You can tell that your Hoover vacuum cleaner is charging when the power indicator light turns red.

Step 5. Unplug the power cord from the vacuum cleaner once the machine is fully charged. You can tell that your Hoover vacuum cleaner is fully charged when the power indicator light turns blue. When it is fully charged, you can start using your Hoover vacuum cleaner again.

Leave a Comment