When you get a Shark vacuum, you will need to learn how to use it. In this article we will show you how to use your Shark vacuum cleaner . . .
Table of Contents
How To Use Shark Ion Robot Vacuum Cleaner
Follow the steps below to use your Shark ion robot vacuum cleaner properly . . .
Step 1. Set up the charging station next to a power outlet.
Step 2. Connect the power cord to the power outlet. Turn the power outlet on.
Step 3. Flip the vacuum cleaner over and then connect the two side brushes to it.
Step 4. Flip the vacuum cleaner over again.
Step 5. Flip the power switch on the side of the vacuum cleaner then set it on the charging station.
Step 6. Leave the vacuum cleaner to charge for about three hours. You can tell that your Shark ion robot vacuum cleaner is charging when you see the three power indicator lights flashing.
Step 7. Turn the power outlet off once the vacuum cleaner is fully charged. You can tell that your Shark ion robot vacuum cleaner is fully charged when the power indicator lights stop flashing.
Step 8. Clear any obstructions from your house before you start using the vacuum cleaner.
Step 9. You can start using your Shark ion robot vacuum cleaner now.
How To Use Shark Vacuum Cleaner Attachments
Here’s how to use the different attachments of your Shark vacuum cleaners . . .
How to use Shark vacuum cleaner crevice tool
Follow the steps below to use the crevice tool of your Shark vacuum cleaner . . .
Step 1. Connect the vacuum hose to the main body of the vacuum cleaner.
Step 2. Connect the crevice tool to the vacuum hose. Make sure to lock it in place properly.
Step 3. Turn the vacuum cleaner on.
Step 4. You can use the crevice tool to clean small spaces like the sides of car seats.
How to use the upholstery tool of your Shark vacuum cleaner
Follow the steps below to use the upholstery tool of your Shark vacuum cleaner . . .
Step 1. Connect the vacuum hose to the main body of the vacuum cleaner.
Step 2. Connect the upholstery tool to the vacuum cleaner hose.
Step 3. Turn the vacuum cleaner on.
Step 4. The upholstery tool is used for removing lint from things like sofas, cushions, or curtains etc.
How to use the pet tool of a Shark vacuum cleaner
Follow the steps below to use the pet tool of your Shark vacuum cleaner . . .
Step 1. Connect the vacuum hose to the main body of the vacuum cleaner.
Step 2. Connect the pet tool to the vacuum cleaner hose.
Step 3. Turn the vacuum cleaner on.
Step 4. You can use the pet tool to remove pet fur from the rugs, sofas and cushions.
How To Use Shark Duo Clean Vacuum Cleaner
Follow the steps below to use your Shark duo clean vacuum cleaner . . .
Step 1. Connect the power cord to the power outlet then turn the outlet on.
Step 2. Press the button on the handle of the vacuum cleaner to turn the machine on.
Step 3. To make the brush roller start spinning, use your foot to firmly press the brush head attachment then recline the vacuum cleaner.
Step 4. Slide the brush setting switch to the top when cleaning thick rugs.
Step 5. Slide the brush setting switch to the middle when cleaning thin carpets.
Step 6. Slide the brush setting switch to the bottom when cleaning hard floors.
If you see the brush indicator light turn green, it means that the vacuum cleaner is working properly but if the light turns red, it means that some parts of the vacuum cleaner may be clogged.
If the brush roll indicator light starts flashing red, it means that the vacuum cleaner is overheating. Unplug the vacuum cleaner then leave it to cool down for about thirty minutes.
If the brush roll indicator light starts flashing green, it means that the cleaner is operating in a place where the temperature is too hot or too cold. You can only use your Shark duo clean vacuum cleaner in places where the temperature is between three degrees Celsius to forty degrees Celsius.
Step 7. Press the release latch on the handle of the vacuum cleaner to disconnect it from the vacuum wand.
Step 8. Press the release button of the vacuum wand to disconnect it from the pod.
Step 9. To disconnect the vacuum canister from the vacuum cleaner, press the button close to the dust container then separate it from the rest of the machine.
Step 10. Press the button at the bottom of the vacuum canister to open the bottom lid.
Step 11. Empty the canister over a trash can.
Step 12. Reconnect the canister to the vacuum cleaner. You can start using your Shark duo clean vacuum cleaner now.
How To Use Shark Vacuum Cleaner Mop
Follow the steps below to use the mop of your Shark vacuum cleaner . . .
Step 1. Connect the power cord to the power outlet then turn the outlet on.
Step 2. Connect the power cord to the vacuum cleaner.
Step 3. Leave the vacuum cleaner to charge for about two to three hours.
Step 4. Unplug the vacuum cleaner from the power outlet once it is fully charged. You can tell that your Shark vacuum cleaner mop it fully charged when you see the power indicator light turn green.
Step 5. Attach the mop pad to the bottom of the brush head attachment.
Step 6. To start vacuuming, pull the trigger at the bottom of the vacuum cleaner handle.
Step 7. Press the button on the top of the vacuum cleaner handle to start spraying water.
Step 8. When you are ready to dispose of the mop pad, hold the vacuum cleaner over a trash can then press the button on the left side of the brush head attachment to disconnect the mop pad from it. You can start using your Shark vacuum cleaner mop now.
