If you have an issue with your Oreck vacuum cleaner brush, this article is for you. Here we’ll help you find the issue your Oreck vacuum has . .
Table of Contents
Oreck Vacuum Cleaner Brush Not Spinning – Why and How To Fix
If the brush roller of your Oreck vacuum cleaner isn’t spinning, the machine could have one of three problems. Keep on reading to figure out and to solve the problem your Oreck vacuum cleaner might have …
The brush roller is clogged
If the brush roller of your Oreck vacuum cleaner is clogged, it won’t be able to spin properly. To solve the problem, you will need to clean the brush roller. Follow the steps below to clean the brush roller for your Oreck vacuum cleaner . . .
Step 1. Make sure your vacuum cleaner is turned off and unplugged from the power outlet before you start the cleaning process. Cleaning any part of your Oreck vacuum cleaner when the machine is turned on or plugged into the power outlet can cause electrocution.
Step 2. Flip the vacuum cleaner over to gain access to the brush roller cover.
Step 3. Get a Phillips head screwdriver and use it to take out the five screws holding the brush roller cover in place. Keep the screws in a safe place.
Step 4. Take the brush roller cover out of the vacuum cleaner and then set it aside.
Step 5. Take the brush roller out of the vacuum cleaner and then slide it out of the vacuum belt. Set the rest of your vacuum cleaner aside.
Step 6. Get a pair of scissors or a small knife and use it to cut off any hair or thread that may be stuck on the brush roller. Take the hair or thread out of the brush roller and then throw it away.
Step 7. If necessary, get a dry piece of cloth or tissue and use it to wipe off any dirt that may be stuck in the brush head attachment. Wipe the brush roller cover as well.
Step 8. When it is completely clean, reconnect the brush roller to the vacuum cleaner and then slide it through the vacuum belt.
Step 9. Reconnect brush roller cover to the vacuum cleaner and then use the five Phillips screws that you removed from the cover earlier to lock it in place properly.
Step 10. Flip the vacuum cleaner over again and then keep it upright.
Step 11. Turn your Oreck vacuum cleaner back on and then check if it is working like it is supposed to now.
The brush roller is bad
If the brush roller of your Oreck vacuum cleaner is bad, it won’t be able to spin properly. To solve the problem, you will need to replace the brush roller. Follow the steps below to replace the brush roller for your Oreck vacuum cleaner . . .
Step 1. Ensure that your machine is turned off and unplugged from the power outlet before you begin the replacement process. Replacing any part of your Oreck vacuum cleaner when the machine is turned on or plugged into the power outlet can cause electrocution.
Step 2. Flip the vacuum cleaner over to gain access to the brush roller cover.
Step 3. Get a Phillips head screwdriver and use it to take out the five screws holding the brush roller cover in place. Keep the screws in a safe place.
Step 4. Take the brush roller cover out of the vacuum cleaner and then set it aside.
Step 5. Take the brush roller out of the vacuum cleaner and then slide it out of the vacuum belt. Set the old brush roller aside.
Step 6. Get a new Oreck vacuum cleaner brush roller of the same kind and put it in place of the old one. Make sure to slide the new brush roller through the vacuum belt.
Step 7. Reconnect the brush roller cover to the vacuum cleaner and then use the five Phillips screws that you removed from the cover earlier to lock it in place properly.
Step 8. Flip the vacuum cleaner over again and set it upright.
Step 9. Turn your Oreck vacuum cleaner back on and then check if it is working like it is supposed to now.
The vacuum belt is bad
If the belt of your Oreck vacuum cleaner is bad, the brush roller won’t be able to spin properly. To solve the problem, you will need to replace the brush roller belt. Follow the steps below to replace the brush belt of your Oreck vacuum cleaner . . .
Step 1. Turn your Oreck vacuum cleaner off and unplug it from the power outlet before you start the replacement process.
Step 2. Flip the vacuum cleaner over to gain access to the brush roller cover.
Step 3. Get a Phillips head screwdriver and use it to take out the five screws at the bottom of the vacuum cleaner holding the brush roller cover in place. Keep the screws in a safe place.
Step 4. Take the brush roller cover out of the vacuum cleaner and then set it aside.
Step 5. Take the brush roller out of the vacuum cleaner and then slide it out of the vacuum belt. Set the brush roller aside.
Step 6. Take the vacuum belt out of the vacuum cleaner. Set the old vacuum cleaner belt aside.
Step 7. Get a new Oreck vacuum cleaner belt of the same kind and then put it in place of the old one. Make sure to lock the new vacuum belt in place properly.
Step 8. Reconnect the brush roller to the vacuum cleaner and then slide it through the new vacuum belt.
Step 9. Reconnect the brush roller cover to the vacuum cleaner and then use the five Phillips screws that you removed from the cover earlier to lock it in place properly.
Step 10. Flip the vacuum cleaner over again and keep it upright.
Step 11. Turn your Oreck vacuum cleaner back on and then check if it is working like it is supposed to now.
