If your Bissell vacuum isn’t spraying water, you’ve come to the right place. Here we will identify the problem your Bissell vacuum has . . .
Table of Contents
Bissell Revolution Carpet Cleaner Not Spraying Water – Why and How To Fix
If your Bissell revolution carpet cleaner isn’t spraying water, the machine could have one of three problems. Keep on reading to figure out the problem your Bissell vacuum cleaner might have . . .
The carpet cleaner is on the wrong setting
One thing that can stop your Bissell revolution carpet cleaner from spraying water properly is leaving it on the wrong setting. If you leave the carpet cleaner on Express mode, it won’t spray water. To solve the problem, switch the setting the Deep clean mode and the vacuum cleaner should start spraying water.
The clean water tank is empty
If your Bissell carpet cleaner clean water tank is empty when you try using the carpet cleaner, It won’t be able to spray water at all. To solve the problem, fill the clean water tank with water and some of the cleaning solution,then the carpet cleaner should start working like it is supposed to now.
The water tank isn’t properly connected to the vacuum cleaner
If your Bissell carpet cleaner water tank isn’t properly connected to the carpet cleaner, the machine won’t be able to spray water properly. To solve the problem, disconnect the water tank from the carpet cleaner and reconnect it properly. You can tell that the water tank it properly secured when you hear it lock with a click.
Bissell Proheat Pet Carpet Cleaner Not Spraying Water – Why and How To Fix
If your Bissell proheat pet carpet cleaner isn’t spraying water, the problem could be that the flow indicator is dirty. To solve the problem, you will need to clean the flow indicator. Follow the steps below to clean your Bissell carpet cleaner flow indicator properly . . .
Step 1. Turn your carpet cleaner off and unplug it from the power outlet before you begin the cleaning process.
Step 2. Unscrew the flow indicator cap and set it aside.
Step 3. Take the red rotor out of the flow indicator chamber and set it aside. Take out the white filter as well.
Step 4. Wash the flow indicator cap under running water and leave it to dry.
Step 5. Wash the red rotor and filter under running and leave them to dry. Make sure the filter is completely dry before putting it back into your vacuum cleaner. Putting a wet filter in your Bissell pet carpet cleaner can cause it to malfunction.
Step 6. When the filter, rotor and flow indicator cap are completely dry, put them back into the vacuum cleaner.
Step 7. Put the filter and rotor back in their places in the vacuum cleaner.
Step 8. Put the flow indicator cover back in its place and turn it clockwise to lock it in place.
Step 9. Turn the vacuum cleaner back on and check if it is working like it is supposed to now.
Note: Always make sure you clean the flow indicator regularly to stop the vacuum cleaner from getting clogged easily.
Bissell Little Green Carpet Cleaner Not Spraying Water – Why and How To Fix
If your Bissell little green carpet cleaner isn’t spraying water, the machine could have one of three problems. Keep on reading to figure out the problem your Bissell vacuum cleaner might have . . .
The spray nozzle might be clogged
If the spray nozzle of your Bissell little green carpet cleaner is clogged, the machine won’t be able to spray water properly. To solve the problem, you will need to unclog the spray nozzle.
Follow the steps below to unclog your Bissell little green carpet cleaner spray nozzle . . .
Step 1. Turn your vacuum cleaner off and unplug it from the power outlet before you begin.
Step 2. Disconnect the spray nozzle from the vacuum cleaner.
Step 3. Use a long and thin object to remove the thing that is blocking the spray nozzle.
Step 4. Reconnect the spray nozzle to the vacuum cleaner.
Step 5. Turn the vacuum cleaner back on and check if it is working like it is supposed to now.
The clean water tank is empty
If the clean water tank of your Bissell little green carpet cleaner is empty, the machine won’t be able to spray water. To solve the problem, you will need to fill the water tank with more water and you will need to add some of your carpet cleaning solution to the water. The vacuum cleaner should start spraying water properly now.
The clean water tank needs to be replaced
If the clean water tank of your Bissell vacuum cleaner is bad, the machine won’t be able to spray water properly. To solve the problem, you will need to replace the water tank. Follow the steps below to replace your Bissell little green carpet cleaner green water tank . . .
Step 1. Turn the vacuum cleaner off and unplug it from the power outlet before you begin.
Step 2. Disconnect the clean water tank from the vacuum cleaner and set it aside.
Step 3. Put a new clean water tank in the place of the old one.
Step 4. Turn the vacuum cleaner back on to check if it is working like it is supposed to now.
Bissell Big Green Carpet Cleaner Not Spraying – Why and How To Fix
If your Bissell big green carpet cleaner isn’t spraying water, the machine could have one of many problems. Keep on reading to figure out the problem your Bissell big green carpet cleaner might have . . .
The inlet below the clean water tank might be clogged
If the inlet below the clean water tank is clogged, the carpet cleaner won’t be able to spray water properly. To solve the problem, you will need to clean the inlet. Use a dry piece of cloth or a piece of tissue to wipe the inlet carefully.
The red cover at the bottom of the clean water tank might have been misplaced
If the red cover at the bottom the clean water has been misplaced, the carpet cleaner won’t be able to spray water properly. To solve the problem, you will need to replace the clean water tank. After replacing the clean water tank, your Bissell big green pro carpet cleaner should start working properly again.
The clean water tank is empty
If the clean water tank of your Bissell big green pro carpet cleaner is empty, the machine won’t be able to spray water. To solve the problem, simply fill the water tank with water and two caps of cleaning solution and the carpet cleaner should start spraying water properly now.
The spray nozzle might be clogged
If the spray nozzle of your Bissell big green pro carpet cleaner is clogged, the machine won’t be able to spray water properly. To solve the problem, you will need to push out the object that is blocking the spray nozzle with a thin and long object. After getting rid of the clog in the spray nozzle, turn the vacuum cleaner back on and check if it is working like it is supposed to now.
The hose may be cracked
If the hose of your Bissell big green carpet cleaner is cracked, the machine won’t be able to spray water properly. To solve the problem, you will need to replace the hose. Follow the steps below to replace the hose of your Bissell big green pro carpet cleaner . . .
Step 1. Turn your carpet cleaner off and unplug it from the power outlet before you begin.
Step 2. Disconnect the hose from the carpet cleaner.
Step 3. Put a new carpet cleaner hose in the place of the old one.
Step 4. Turn the carpet cleaner back on and check if it is working like it is supposed to now.
The hose might be clogged
If the hose of your Bissell big green carpet cleaner is clogged, the machine won’t be able to spray water properly. To solve the problem, you will need to unclog the hose. Follow the steps below to unclog your Bissell big green pro carpet cleaner hose . . .
Step 1. Turn your carpet cleaner off and unplug it from the power outlet before you begin.
Step 2. Disconnect the hose from the carpet cleaner.
Step 3. Use a long and thin pole to push out the object that is clogging the hose.
Step 4. Reconnect the hose to the carpet cleaner.
Step 5. Turn the vacuum cleaner back on and check if it is working like it is supposed to now.
If you have checked for all these issues and your Bissell big green pro carpet cleaner still isn’t spraying water, your machine might have another problem. You will need to contact Bissell customer care for help.
Bissell Spot Cleaner Not Spraying Water – Why and How To Fix
If your Bissell spot cleaner isn’t spraying water, the problem could be that the clean water tank is clogged. To solve the problem, you will need to clean the water tank. Follow the steps below to clean your Bissell spot carpet cleaner water tank . . .
Step 1. Turn the carpet cleaner off and unplug it from the power outlet before you begin the cleaning process.
Step 2. Disconnect the clean water tank from the carpet cleaner.
Step 3. Pull out the thing that is clogging the water tank.
Step 4. Reconnect the water tank to the vacuum cleaner.
Step 5.Turn the carpet cleaner back on and check if it is working like it is supposed to now.
Another thing that can stop your Bissell spot carpet cleaner from spraying water is an empty water tank. To solve the problem, simply fill the water tank with water.
Bissell Carpet Cleaner Won’t Stop Spraying Water – Why and How To Fix
If your Bissell carpet cleaner won’t stop spraying water, the problem could be that the spray trigger is stuck. To solve the problem, you will need to replace the spray trigger. Follow the steps below to replace your Bissell carpet cleaner spray trigger . . .
Step 1. Turn your carpet cleaner off and unplug it from the power outlet before you begin.
Step 2. Disconnect the spray trigger from the carpet cleaner.
Step 3. Put a new spray trigger in the place of the old one.
Step 4. Turn the carpet cleaner back on and check if the spray trigger is working like it is supposed to now.