How To Use A Roomba Vacuum [Quick Guide]

Here’s a quick guide on how to use your Irobot Roomba vacuum cleaner . . .

How To Use A Roomba Vacuum

Here’s a quick guide on how to use a Roomba vacuum . . .

Step 1. Before you use the vacuum for the first time, take out the bin and remove the protective insert then turn the vacuum upside down and take out the battery pull tab.

Step 2. Set the clock and use the home base to charge the vacuum.

Step 3. Before you turn the vacuum on, inspect the places you want to clean and make sure nothing wet is on the floor.

Step 4. Press the clean button twice to start the cleaning process.

how to use a roomba vacuum

Step 5. To pause the cleaning cycle, press the clean button and to resume, press the clean button again.

Step 6. To turn the vacuum off, press and hold the clean button until you see the light go off.

Step 7. The battery icon will have a yellow color when it is charging. Leave the vacuum to charge until the light goes green.

Step 8. The schedule mode allows you to control the times that the Roomba starts cleaning. Use the clock on top of the Roomba to select your preferred time.

Step 9. Use the virtual wall to create a barrier around the vacuum that it will not cross.

Step 10. If the power light on the virtual wall blinks, you will need to replace the battery.

Step 11. Empty the vacuum tray once a cleaning cycle is complete.

Step 12. Clean the vacuum brushes once every week.

See also  How to Clean Carpet Beetles: Your Step-By-Step Solution

Note: Before using the Roomba for the first time, read the safety instructions in the owner’s manual. The Roomba will show a warning sign when something is wrong.

You can start using your Roomba vacuum cleaner now.

Leave a Comment